How to maintain the tandem motor motor stator automatic slotting paper machine?
The following is the tandem motor motor stator automatic slotting paper machine maintenance methods:
I. Daily maintenance
Cleaning: Regularly clear off the surface of the equipment dust and debris, to prevent it from entering the machine's internal impact on normal operation. For the internal cleaning of the equipment, you can use compressed air or special cleaning tools, but be careful to avoid damage to the components
Check fasteners: often check the equipment on the screws, nuts and other fasteners are loose or damaged, if found should be tightened or replaced in a timely manner to ensure the stability of the equipment
Check the wiring: check whether the equipment wiring is firm, there is no damage, aging, short-circuit phenomenon, if there are problems need to be repaired or replaced in a timely manner to ensure the reliability of the electrical connection
Second, regular maintenance
Lubrication maintenance: in accordance with the requirements of the instruction manual of the equipment, regularly for the equipment bearings, gears and other moving parts to add or replace the lubricant. Select the appropriate lubricant type and brand, different parts may require different types of lubricants, such as lithium-based grease, calcium-based grease, etc.
Check belts and chains: If the equipment has belt or chain drives, check their tension and wear regularly. The belt is too loose or too tight will affect the transmission efficiency, and even lead to belt slippage or breakage; chain wear and tear is serious need to be replaced in a timely manner, in order to ensure the smoothness and reliability of the transmission.
Check the electrical system: Use professional electrical inspection tools to regularly measure the insulation resistance, voltage, current and other parameters of the motor to ensure that it is within the normal range. At the same time, check whether the electrical components such as relays, contactors, switches, etc. are working properly, with or without poor contact, overheating and other phenomena
Check the sensors and controllers: check the various types of sensors on the equipment, such as position sensors, temperature sensors, etc., to ensure that they can accurately sense and feedback the operating status of the equipment. For the controller, check whether its program is running normally and whether there is any error message, etc.
Calibration and adjustment: Regular calibration and adjustment of the various parameters of the equipment, such as the insertion depth of the slot paper, tension control, etc., to ensure that the equipment's working accuracy and product quality.
Troubleshooting and processing
Abnormal sound: If the equipment in the process of running abnormal sound, such as friction, impact sound, etc., you should immediately stop the machine to check. It may be caused by bearing wear, loose parts, foreign objects entering, etc., and need to repair or replace the faulty parts in time 45.
Excessively high temperature: when the equipment has a high temperature, check whether the cooling system is normal, such as whether the fan is running well and whether the ventilation channel is blocked. At the same time, it is also necessary to check whether there are problems such as overload operation and electrical failure, and take appropriate measures to deal with them in time 4.
Unstable operation: if the equipment runs unstably, such as speed fluctuation, slot paper insertion is not smooth, etc., it may be caused by the wear and tear of mechanical parts, electrical system failure, control system abnormality and so on. It is necessary to carefully inspect and test the relevant components to find out where the problem lies and solve it.
Fourth, long-term idle maintenance
Moisture and dust: If the equipment is idle for a long time, it should be stored in a dry, well-ventilated environment, and take dustproof measures, such as the use of dust cover to cover the equipment, to prevent dust and moisture from entering the interior of the equipment, the parts and components caused by corrosion and damage 4.
Regular energized operation: even if the equipment is not in use, it should be energized for trial operation every once in a while, so that the various parts of the equipment can be properly operated, and to prevent the rusting and aging of the parts caused by prolonged idleness.
Inspection and maintenance: Before re-activating the equipment that has been idle for a long period of time, the equipment should be inspected and maintained in its entirety, including cleaning, lubrication, inspection of the electrical system, inspection of mechanical parts, etc., to ensure that the equipment can be put into use properly.
※: If you still can't solve the equipment failure through the above ways and means, please contact Xinhui electromechanical technical specialists through the page chat tool to seek help.
