How to maintain the motor motor rotor single station tester?

How to maintain the motor motor rotor single station tester?

Motor motor rotor single-station tester maintenance can refer to the following points:

1, daily inspection: every day before work to check whether the various parts of the machine is intact, including fasteners, connectors, transmission parts, etc. whether there is loose or damaged.

2, lubrication and maintenance: regular lubrication of the machine's rails, bearings, gears and other parts that need lubrication to reduce wear and tear and extend the life of the equipment.

3、Cleaning work: regularly clean the machine, especially the test area of metal shavings, dust and debris to prevent them from affecting the normal operation of the machine.

4、Check the electrical system: check whether all electrical connections are firm and there is no sign of looseness or corrosion. Check the cables and wires for wear or damage.

5, check the hydraulic and pneumatic system: for the use of hydraulic or pneumatic system of the test machine, regularly check the oil level, air pressure, as well as the cleanliness of the hydraulic oil and pneumatic oil.

6, sensor and control unit check: check whether the sensor is working properly, clean the sensor surface to ensure the accuracy of the sensor. Also check whether the control unit is abnormal.

7、Software update and backup: Regularly update the control software of the tester to ensure that the software is in a new state. At the same time, regularly back up important programs and data.

8、Replacement of wear parts: Regularly check the wear parts of the tester, such as the test head, molds, etc., once the wear is found to be serious, it should be replaced in time.

9、Performance test: Conduct regular performance tests to check the accuracy, speed and stability of the machine to ensure that the machine operates according to the specified parameters.

10、Operator training: Regular training for operators to ensure that they understand the operating procedures and maintenance knowledge of the machine.

11, the development of maintenance plans: the development of a detailed maintenance plan, and in accordance with the plan to implement, including daily, weekly, monthly and annual maintenance tasks.

12, Emergency Troubleshooting: Develop emergency troubleshooting procedures to ensure that when the machine fails to respond quickly and repair.

Follow these maintenance measures can help extend the life of the equipment and maintain its efficiency.

※ If through the above ways and means still can not solve the equipment failure, please contact Xinhui Electromechanical Equipment Co., Ltd. through the page chat tool to seek help from technical specialists.