What are the common software problems and solutions for brushless motor motor manual stator slot paper machine?
The common software problems and solutions for brushless motor motor manual stator slot paper machine are as follows:
1, program operation is not stable
Failure performance
Groove paper machine in the operation process, the software program occasionally appears to be stuck, dead phenomenon, resulting in the operation of the equipment is not responsive.
The program will automatically exit or restart inexplicably, affecting the continuity of work.
Solution
Check whether the software has compatibility problems with the system or other software, try updating the software version or adjusting the system settings to ensure that the software can run stably.
Check the memory and CPU occupancy of the device, close other unnecessary programs, release system resources to ensure that the slot machine software has sufficient resources to run.
2、Error in parameter setting
Failure performance
Motor speed, torque and other parameters set with the actual demand does not match, resulting in poor operation of the slot machine, such as paper conveying speed is not stable, the depth of the slot paper is not accurate.
Some working modes of the equipment are set incorrectly, so that the equipment can not operate according to the expected process flow.
Solution
Carefully consult the operation manual of the equipment and reset the parameters in the software correctly according to the actual production requirements and parameters of paper and motor.
For complex parameter settings, you can consult the technical support staff of the equipment supplier to obtain professional guidance and advice.
3、Communication failure
Failure performance
Communication between the software and the controller, sensors and other hardware devices is interrupted, resulting in equipment status can not be correctly displayed on the software interface, or the instructions issued by the software can not be transmitted to the hardware devices.
Errors or loss of communication data, so that the equipment operation is abnormal, such as motor malfunction, sensor feedback information is inaccurate.
Solution
Check whether the connection of the communication interface is loose or damaged, and ensure that the physical connection between the hardware device and the computer is normal.
Confirm whether the communication parameters such as communication protocol and baud rate are set correctly to ensure that the communication parameters between the software and the hardware device match.
Try to restart the communication device and software, sometimes you can restore normal communication.
4、Software update problems
Failure performance
After the software update, the new function can not be used, and the original function conflict and other issues.
The device prompts a software update, but the update process appears in the download failure, installation interruption and so on.
Solution
If there is a problem after the software update, try to roll back to the last stable software version and wait for the software developer to fix the problem after the update.
For update failure, check whether the network connection is stable to ensure that the network will not be interrupted during the download process. At the same time, check whether the storage space of the device is enough, if the space is insufficient, clean out enough space before updating.
5、Virus or malware infection
Failure performance
The software runs significantly slower, and there are abnormal pop-up windows or prompt messages.
Some data of the device is tampered with or lost, and the function of the software is restricted.
Solution
Run antivirus software and malware scanning tools to scan all the devices and clear out the viruses and malware found.
Perform backup recovery of important data to ensure data integrity and accuracy. At the same time, strengthen the protection of the equipment, install firewalls to avoid being attacked by viruses or malware again.
※: If you still can't solve the equipment failure by the above ways and means, please contact the technical specialist of Xinhui Mechanical and Electrical Equipment Co.
