What are the common software problems and solutions for brushless motor motor automatic skimmer?
The common software problems and solutions of brushless motor motor automatic skimmer are as follows:
1、Program operation error
Failure phenomenon: the rewinding machine appears abnormal action, such as motor irregular start and stop, the rewinding speed is not stable, or some functions can not be performed normally.
Reason analysis: the software program has loopholes or errors, may be caused by the development process is not fully tested; the program is interfered with in the running process, resulting in data errors or program run away.
Solution: Contact the equipment manufacturer to obtain the updated version of the software to repair the known program vulnerabilities; reset the control system of the receiver, restart the program to see if it can be restored to normal; check the electromagnetic environment of the equipment to ensure that there is no strong source of electromagnetic interference, and if necessary, take shielding, grounding and other anti-interference measures.
2, parameter setting error
Failure phenomenon: receiving machine operating parameters do not match the actual demand, such as receiving too slow or too fast, receiving inaccurate length, tension control is not stable and so on.
Cause analysis: the operator has a wrong understanding of the meaning of the parameters, set an inappropriate value; equipment in the operation process, the parameters may be accidentally modified.
Solution: Check the operation manual of the equipment carefully and reset the correct parameters; for the key parameters, password protection can be set to prevent misuse of the modified; record the operating status before and after the parameter modification, so as to compare and analyze and find the appropriate parameter values.
3、Incompatible communication protocol
Failure phenomenon: the receiver and the host computer or other devices can not communicate normally, can not receive commands or upload data.
Cause Analysis: The communication protocol set in the software is inconsistent with other devices, such as baud rate, data bits, stop bits, parity bits and other parameters do not match; communication between the two sides using different versions of the communication protocol.
Solution: Check and adjust the communication parameters of the receiver and the communication equipment to ensure that the two sides of the baud rate, data bits, stop bits, parity bits, etc. are identical; if the communication protocol version, contact the equipment supplier to obtain a compatible communication protocol software or version upgrade.
4、Data loss or damage
Failure phenomenon: The operating data and history of the receiver are lost or displayed abnormally, resulting in the inability to carry out effective production management and fault analysis.
Cause analysis: storage device failure, such as memory cards, hard disk damage; software errors in the data storage process, may be due to sudden power outages, system crashes and other reasons.
Solution: Use data recovery software to try to recover the lost data, if it is a storage device hardware failure, you need to replace the storage device to recover the data; regular backup of important data, you can use external storage devices or cloud storage and other ways to prevent data loss; optimize the data storage mechanism of the software, increase the data verification and recovery functions to improve the stability and reliability of data storage.
5、Software version incompatibility
Failure phenomenon: After installing new software version or integrating it with other software, the control system of the receiving machine appears unstable operation and abnormal function.
Cause Analysis: The new software version is incompatible with the hardware driver; there are conflicts with other related software.
Solution: Contact the equipment manufacturer to confirm the compatibility of the software version with the hardware, and get the appropriate software version or hardware driver; check the other software integrated with the skimmer control system to see if there is any conflict; if there is any conflict, adjust the installation order or settings of the software, and if necessary, replace the other compatible software.
※: If you still can't solve the problem by the above ways and means, please contact the technical specialists of Xinhui Mechanical and Electrical Equipment Co.
